Isolated RS-232 to Dual RS-485 Intelligent Hub [rdc485ih]
$ 669.00 – $ 699.00 exc. GST
rdc485ih Data Sheet rdc485ih User Manual
Product Code: rdc485ih, rdc485ih-dv-4p-cd
Warranty: 12 months
Build Option:
- Isolates, repeats/converts and switches between RS-232 and RS-485 signals
- Various isolation options available
- Protocol Independent
- 3-port Master/Slave, Hub, or switch between ports A & C or B & C.
- 3-wire operation (TX, RX, GND) for one RS-232 port
- 2-wire operation (T+, T-, GND) for two RS-485 ports
- Voltage Input : 9 to 36 Vdc – Accepts unregulated 9 to 36v DC power supply. Suitable for industrial 24vdc supplies, 12v or 24v battery systems, or supply from any low-cost DC transformer pack. Fully in-rush and surge protected.
- 4-port Isolation – 4 of 4 ground isolation means all data grounds are 100% isolated from each other and the power supply ground. Like 3 of 3 ground design, this is always the safest design option. All redundancy – supporting products (hubs, arbitrators etc) are based on this design.
| Power Supply Configuration | 5v – Regulated 5 Vdc ± 5%, dv – Unregulated 9 to 36 Vdc, hv – Regulated 48 Vdc ± 20% (requires FULL isolation option) |
|---|---|
| Isolation Options | |
| Connector Configuration | cd – DB9 connector Port 1, removeable 5-way screw terminals on Port 2, dd – DB9 Female (DCE) on RS-232 port, DB9 Male on RS-485 ports |
About Robust DataComm
Robust DataComm Pte Ltd is a Singapore-based company specialising in industrial communication products since 1994. The company is backed with decades of industrial experience and coupled with our well-documented processes
Capabilities
RDC devices is design with fully galvanic isolation and capabilities to meet, solve and maintained industrial data communication network in harsh environment.
Our devices have three ports of isolation with both sides of the data communication having floating power supplies. Our data direction control is fully automated
In case of receiving any unnatural activation or surge from the power supply or signal line, it will not further damage to other parts of the system.
In term of function, we focus and specific on only one function without any complicating settings and only minimum settings are require. It is easily install and connect mainly plug and screw.
Our device have a wider range of power supply voltage ranging from 9 ~ 36VDC.
We designed the device to smaller size for compact environment. The weight is very light with case material made of polyamide nylon, fungus and termite resistant and self-extinguishing (UL94 V2) as stated in our datasheets.
Related products
Redundancy Support
Redundancy Support
Redundancy Support
Redundancy Support
Redundancy Support
Redundancy Support
Redundancy Support
